How to solve the problem of leaky tub faucet ?- Part 1
Dec 19, 2021Ideally, the process of replacing the washer, washer or O-ring of the bathroom faucet will not take much time, but things do not always go smoothly. If you have hard water and the faucet has not been repaired for several years, it is likely that the faucet handle is stuck on the valve stem or the valve itself is welded to the valve housing. When the handle or valve cannot be removed by pulling with fingers or pliers, heavier tools, such as handle puller or valve puller, need to be used.
Check whether there is leakage behind the wall
The other two types of faucets - those with disc valves and those with ball valves - are more common on sink faucets than on bathtub faucets. Delta, a company that introduced ball valves, stopped providing ball valves on bathtub faucets in the 1990s, so your faucet must be very old. Only one handle can have a ball valve. Disc valves are more common in bathtub faucets than ball valves. If your single handle or double handle faucets happen to have disc valves, you will be lucky because they rarely leak and are easier to repair than other types of valves.
Get ready to change the washer
If you have replacement parts ready before disassembly, it will take less time to replace the washer and washer to prevent leakage of the bathtub faucet, and all you need is the brand and model of the faucet. Usually, you can identify the manufacturer by covering the logo that hides the handle screw, chrome bath tub faucet or the manufacturer's name can be displayed on the faucet trim frame (also known as the metal part that hides the hole in the wall where the pipe is located). If you know the manufacturer, you can search for a specific model on its website and take this information to the hardware store to find a specific model repair kit.
If the faucet is stained with mineral deposits, the handle or valve is likely to get stuck, so you may want to invest in a handle puller. If you have a barrel faucet, a barrel puller. china factory basin factories These are convenient tools that can be seen everywhere at home. They can usually be used for other faucets and faucets that need to be repaired at present. When you are in a hardware store, buy some plumber grease so that you can lubricate the rubber parts you want to replace.
You need to turn off the water supply in the bathroom. If you are like many homeowners, you may not know where the stop valve is. Find one in the basement below the bathroom, or find a main valve near the entrance of the main pipe into the house. In some cases, the valve is located outside the house. If you can't find the valve, you may have to turn off the valve on the street, but call the water company before you do so. There may be a rule that prohibits homeowners from closing it, and in order to avoid responsibility in case of failure,china wall mounted bath shower mixer suppliers you must arrange for a worker to close it for you.
Related Product: Kitchen Sink & Faucet Ideas & Inspiration